Getting Started - Fluke Biomedical RAYSAFE 452 Manual Del Usuario

GETTING STARTED

Power on the instrument with a long press (approximately 3 seconds)
on the center button (⏻).
3 s
Figure 2. Power on.
The instrument starts to measure after about 5 seconds.
Position the instrument with the sensors towards the radiation source.
The instrument will switch between its different sensor systems and
adapt its averaging times automatically.
Measurement quantities change with the lid. See "Lids and quantities"
on page 7.
RaySafe 452 – Users Manual (EN)
Figure 3. Position with the sensor area facing the radiation source.
Power off with a long press on the center button. The instrument
automatically stores a log of rate values with 1 second resolution.
5