Getting Started - Waterpik WP-70 Manual Del Usuario

Ocultar thumbs Ver también para WP-70:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

36

gettIng stArteD

Plug the cord into an electrical outlet. If the outlet is controlled by a wall
switch, be sure it is turned on.
Preparing the reservoir
Remove reservoir from base. Fill the reservoir with lukewarm water.
Replace the reservoir over the base and press down firmly.
Inserting and removing tips
Pull the knob on the top of the handle toward the hose and insert tip into the
center of the knob. The colored ring will be flush with the end of the knob if
the tip is correctly locked into place. To remove tip from the handle, pull the
knob on the top of the handle toward the hose and pull tip from handle.
Adjusting the Pressure setting
Placement in mouth
Slide the pressure control switch located on the
Lean low over sink and place the jet tip in
handle to the lowest setting (away from the tip
mouth. Aim the tip toward teeth.
as far as possible) for first-time use. Gradually
With your free hand, slide the on/off switch on
increase pressure over time to the setting
the base of the unit to the "up" position. Set
you prefer – or as instructed by your dental
pressure at desired setting.
professional.
37
Direct the stream by turning the knob at the top
of the handle.
Tabla de contenido
loading

Tabla de contenido