Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Use only on dry surfaces.
Caution when using the device on the stairs.
CAUTION: while the unit is running, do not
approach the air inlet to ears, eyes, etc., or to fragile
items such as vases, tools, electronic machines.
DESCRIPTION G90005
1 Floor brush
4 Power switch
7 Cover opening button
10 Dust bin cap
13 Multi-cyclone filter system
Other included accessories: pet brush and multifunction compact brush.
INSTALL THE ACCESSORIES
1. Install the crevice nozzle
You can use the vacuum cleaner with the
multifunction nozzle (8), to reach the most difficult
corners, under furniture, for cleaning the upholstery
(sofa, bed, armchairs) or for cleaning the car.
Proceed with the installation of the nozzle (8)
directly to the power unit as shown in Fig 1.
Fig. 2
3. How to install the dust bin
Put the cover (10) on the container (5), aligning the
arrow▼ on the lid with the indication OPEN● and
rotate the lid to lock it by aligning the arrow▼
indicating LOCK.
As shown in Fig.3, hook the bottom of the dust
2 Telescopic plastic tube
5 Dust bin
8 Crevice nozzle
11 HEPA and sponge filter 12 Outlet air cover
14 Dust cover
In the same way you can install pet brush and
2. Telescopic tube installation
You can use the rigid tube (2) to connect all the
accessories such as the floor brush (1) or the
nozzle (8).
Place the tube (2) in the suction hole aligning the
◄ arrow on the motor body with the indication
OPEN ► stated on the tube (2).
Turn to LOCK► lo lock it in position.
At the lower end of the tube (2) attach the desired
accessory (brush or nozzle), tightening it (see
Figure 2 for reference).
You can always extend the telescopic tube as
desired, acting on the block on the pipe which is
indicated by the arrow ▼.
3 Dust bin block
6 Cover locking hook
9 Release button
15 Dust emptying button
multifunction compact brush
Fig. 1
Fig. 3
13
Tabla de contenido
