Do not immerse the motor unit in water or other liquids,
clean it with a damp cloth only.
DESCRIPTION G90002
1 – ON/OFF button
2 – Handle
3 – Power cord
4 – Folding handle button
5 – Motor unit
6 – Suction hole
7 – Open container button
ASSEMBLING ACCESSORIES
FLEXIBLE HOSE (11), BRUSH (12) AND NOZZLE (13):
These attachments must be inserted in the suction hole (6) as shown in Figures A and B.
The flexible hose (11) must be assembled in the same way, the floor brush and the multifunction nozzle can
be mounted at the end of the hose or inserted directly in the hole.
AIR CONCENTRATOR (14)
This accessory can convert vacuuming to air blowing. For assembling, follow the steps below:
-
Rotate the air outlet grille and remove it (Figure C)
-
Attach the accessory in place by turning it clockwise as shown in Figure D.
SWITCH ON THE UNIT
-
Before plugging the unit, ensure that the power switch (1) is OFF.
-
Connect the plug. Take the cleaner and switch it on.
CAUTION: the vacuum cleaner is powerful. Hold it firmly to prevent it from falling causing damages
or personal injury.
8 – Dust container door
9 – Dust container
10 – HEPA filter
11 – Flexible hose
12 – Floor brush
13 – Multi function nozzle
14 – Air concentrator
13