Safety Instructions; Putting Into Operation - EHEIM 2006 Manual De Instrucciones

English
Thank you
for purchasing your new EHEIM internal filter. This practical Pick-up system
combines optimised performance with maximum reliability and the utmost
efficiency.

Safety instructions

Only for use in rooms.
All electrical equipment in the water must be disconnected from the mains
during care and maintenance work.
The connecting line of this device can not be replaced. When the line is dam-
aged, the device must no longer be used. Never carry the pump by the cable;
do not bend the cable.
Only use filter in water: The pump must be positioned beneath the surface of
the water.
This equipment is not intended for use by persons (including children) with li-
mited physical, sensory or mental abilities or for persons with no experience
or knowledge unless they are supervised by a person responsible for safety or
unless they have received from such a person instructions on how to use the
equipment. Children should be supervised to ensure that they do not play with
the equipment.
Notice: These divices produce magnetic fields which might cause
20 cm
electronic and mechanical disturbances or damages. This also re-
fers to pacemakers. Please consult the manuals of medical equipment for the
required safety margins.
Attention: Maintenance work presents the risk of crushing the fingers due to
high magnetic forces.
Do not dispose of this product as normal household waste. Take it to your local
refuse collection site.
The product is qualified in accordance with the respective national regulations
and guidelines and meets EC standards.
geprüfte
Sicherheit

Putting into operation

A Filter cover
ister Motor housing
B Insert the 4 suction cups on the reverse side of the filter and attach
device to the interior wall of the aquarium.
C On the rear of the motor housing there is a groove for the cable, which
allows for 3 different cable laying possibilities. The 2 included clips are
for closing the unused apertures, to prevent fry or small fish from
getting trapped in them.
D The opening of the output nozzle must be placed min. 1 cm (0.4 in.) be-
low the water surface in order to achieve good surface movement. The
flow direction can be set within a range of ±45°.
E After installation in the tank, the filter can be operated by connecting
to the mains plug. The pump output can be easily adjusted with the
output regulator.
Internal filter 2006
Output nozzle, rotatable
4 suction cups
Power regulator Can-
2 x clips.