Unload The Discs; Set Your Printing Preferences; Operate The Producer Iv - Rimage Producer P-IV 8200N Guia Del Usuario

Operate the Producer IV

3. Place up to 100 discs to be recorded and/or printed in the bin.
• The default bin configuration for DVD-based systems is:
Bin 1 = CD
Bin 2 = DVD
Bin 3 = DVD-DL
Bin 4 = Output/Reject
• The default bin configuration for systems with Blu-ray recorders is:
Bin 1 = CD
Bin 2 = DVD
Bin 3 = BD
Bin 4 = Output/Reject
Important! Place the discs with the recording side facing down.
Tip: You may designate bins 1 through 4 as input, output, reject, or
output/reject and specify media type through your software.
4. Repeat steps 2 - 3 until the required bins are filled.
5. Close the front door.

Unload the Discs

1. Open the front door.
2. Press the operator button to rotate the carousel and place a bin in
position to remove discs.
3. Remove all discs from the bin.
4. Repeat steps 2 - 3 until the required bins are empty.
5. Close the front door.
2002543_A

Set Your Printing Preferences

Printing preferences allow you to set up and run your Producer IV to
produce the best possible label on your discs. Refer to your printer user
guide for specific printing preferences instructions.
For more information visit rimage.com/support
11