Air Supply And Connections - Porter Cable 70-512 Manual Del Usuario

HAZARD
RISK OF
ENTANGLEMENT
RISK OF
CUT OR BURNS
WARNING
• Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as
tool may explode, possibly causing injury.
• Do not use supply sources which can potentially exceed 200 P.S.I.G. as tool may burst,
possibly causing injury.
• The connector on the tool must not hold pressure when air supply is disconnected. If a
wrong fitting is used, the tool can remain charged with air after disconnecting and thus will
be able to after the air line is disconnected possibly causing injury.
• Always disconnect air supply: 1.) Before making adjustments; 2.) When servicing the tool;
3.) When tool is not in use; 4.) When moving to a different work area, as accidental
actuation may occur, possibly causing injury.
WHAT COULD HAPPEN
• Tools which contain moving
elements, or drive other
moving tools, such as grinding
wheels, sockets, sanding
discs, etc. can become entan-
gled in hair, clothing, jewelry
and other loose objects,
resulting in severe injury.
• Tools which cut, shear, drill,
punch, chisel, etc. are capable
of causing serious injury.

AIR SUPPLY AND CONNECTIONS

HOW TO PREVENT IT
• Never wear loose fitting
clothes, or apparel which
contains loose straps or ties,
etc. which could become
entangled in moving parts of
the tool.
• Remove any jewelry, watches,
identifications, bracelets,
necklaces, etc. which might
become caught by the tool.
• Keep hands away from moving
parts. Tie up or cover long hair.
• Always wear proper fitting
clothing and other safety
equipment when using this
tool.
• Keep the working part of the
tool away from hands and
body.