How To Use - Remington MB4110 Manual De Instrucciones

ENGLISH
CHARGING VIA STANDARD ELECTRICAL SOCKET
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains.
When charging the LED indicator will illuminate
Allow 14~16 hours for a complete charge.
USB CHARGING VIA PC
Ensure the product is switched off.
Connect your USB cable to the USB port on the PC
Connect the USB cable to your beard trimmer
When charging the LED indicator will illuminate
Allow 14~16 hours for a complete charge.
CORDED USE
Connect the charging adaptor to the product and then to the mains.
When the cord is connected to the mains, a charging LED light is displayed on the beard
trimmer.
CAUTION: Extended mains only use will result in the reduction of the battery life.
WARNING: The hair clipper can not be operated in corded mode while connected to a
PC via the USB port.
CORDLESS USE
When the unit is switched on and fully charged, the product can be used in cordless mode
for up to 40 minutes.
BEFORE YOU BEGIN
Always comb your beard or moustache with a fine comb before you start trimming.
0.5-5.5MM MICRO SETTING COMB
The 0.5-5.5mm micro setting comb can be adjusted to give you setting of 0.2mm adjustment
simply by turning the wheel to the desired setting. Turn the wheel clockwise for longer length
and anticlockwise for shorter length.
The setting number will appear on the length position indicator.
ATTACHING AND REMOVING THE 0.5-5.5 MM MICRO SETTING COMB
With the trimmer blade facing away from you, slide the guide comb on top of the clipper
blade and click into position.
With the trimmer blade facing away from you, carefully push the guide comb away from
the trimmer blade.
2
100595_REM_IFU_MB4110_21L.indd 2 100595_REM_IFU_MB4110_21L.indd 2

HOW TO USE

12.08.10 20:59 12.08.10 20:59