Cramer 82B1300 Manual Del Usuario página 8

WARNING!
Do not use this product if any parts on the Packing List are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by the
manufacturer and require customer installation. Use of a
product that may have been improperly assembled could
result in serious personal injury.
Assembling the Trigger Handle
1 Slide trigger handle (A) on the front tube (B).
2 Move trigger handle to desired location before fully tightening. Use
supplied knob (C) to tighten trigger handle to the blower tube.
3 Place the cord (E) in the cord retainer (F).
Assembling the Blower Tube
1 The flexible tube (D) is connected to the fan outlet tube from the
manufacturer.
2 Align either of the grooves (a) in tube (G) with the tabs (b) on tube (B). Turn
the tube in the direction of the arrow until both of the tabs slide into the
lock positions (c).
3
Connect tube (H) to tube (G). For shorter tube application, turn rear tube
counterclockwise and move tube to upper position (d).
Assembling the Tube Assembly
The tube assembly can be disconnected from the backpack assembly.
1 Press the blower release button (l) and pull up to disconnect the tube
assembly from the backpack assembly.
(see Figure 2)
(see Figure 3)
(see Figure 4)
Back Pack Assembly Application
The backpack assemby is designed with a cord adapter (sold separately) so that
other 82V products can be connected.
1 Align the plug release button (K) with the arrow (L) on the socket (J).
2 Insert the plug into the cord adapter, and turn clockwise until the release
button engages.
3 To disengage the plug, pull the plug release button back (K) and turn
counterclockwise.
To Install/ Remove the Battery
WARNING!
Follow these instructions in order to avoid injury and to reduce
the risk of electric shock or fire:
• Replace the battery pack or the charger immediately if the
battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before inserting or
removing the battery pack.
• Verify that the battery pack is removed and the switch is in
the OFF position before inspecting, adjusting, or performing
maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the
section entitled Charging Procedure.
WARNING!
Always take care of your feet, children, or pets around you when
pressing the battery release button. Serious injury could result if
the battery pack falls. NEVER remove the battery pack when in a
high location.
(see Figure 5)
7
cramer.eu
EN GB