Channels; Detection Of Equipment; Devices - Seca 376 Manual De Instrucciones Y Garantía

English
The following combination of devices is possible per
wireless group:
• 1 set of baby scales
• 1 set of personal scales
• 1 length measuring device
• 1 seca wireless printer
• 1 PC with seca USB wireless module

Channels

The devices communicate with each other within each
wireless group via three channels (C1, C2, C3). This
ensures reliable, troublefree data transmission.
When you set up a wireless group with the scales, the
device will suggest three channels guaranteeing opti-
mum data transmission. We recommend accepting the
channel numbers suggested.
C1
C2
C3
You can also select the channel numbers (0 - 99) man-
0
ually, for example if you want to set up more than one
wireless group.
The channels must be sufficiently far apart to ensure
troublefree data transmission. We recommend a spac-
ing of at least 30. Each channel number may only be
used for one channel.
Example of configuration; channel numbers when
setting up 3 wireless groups within one surgery:
• Wireless group 0: C1=_0, C2= 30, C3=60
• Wireless group 1: C1=10, C2=40, C3=70
• Wireless group 2: C1=20, C2=50, C3=80

Detection of equipment

If you wish to set up a wireless group with the scales,
they will search for other active devices from the

devices

system. The devices detected are
seca 360° wireless
shown as modules in the display on the scales (e.g.
MO 3). The meaning of the numbers is as follows:
• 1: Personal scales
• 2: Length measuring device
• 3: Wireless printer
• 4: PC with seca USB wireless module
• 7: Baby scales
• 5, 6 and 8-12: Reserved for system expansion
seca 360° wireless Network • 51