Master Trimmers MT Professional 50 Manual De Uso Y Mantenimiento página 26

Place the collection bag, as shown in the following image, resting
7
the ring on the hooks of the barrel located in the lower part of the
machine body (A).
Remove the screws, washers and nuts indicated in the following
9
image using the Allen key No. 3 (N).
Assemble the outlet tube (E) at the end of the container. Insert the
11
groove of the tube into the knob to fix it.
26
Place the container (B) on the grid of the machine body. Secure it
8
with the two retaining knobs (F).
Place the dispenser body (D) in position and fix it to the container
10
lid (B) with the components from the previous step. Tighten the
bolts progressively in a staggered manner to distribute the forces
evenly.
Finally, connect one end of the power cable (M) supplied to the
12
connector provided on the body of the machine, and the other
end to the electricity supply.
IMPORTANT: Make sure that the electrical wiring is
perfectly positioned, without forming loops that could
cause tripping.
www.masterproducts.es