Master Trimmers MT Professional 50 Manual De Uso Y Mantenimiento página 25

Start-Up
Assembling the MT Professional 50/75
The MT Professional 50 and 75 machines are delivered fully
1
protected and boxed. Open the box and check the contents. Place
the parts on a flat surface with room to manoeuvre.
Place the body of the machine (A) as shown in the image, on a flat
3
surface with a height to facilitate assembly. Fix the feet with the
ISO 7380 M6 x 12 screws (H) with the help of the Allen key No. 4
(O). Proceed in the same way with the remaining feet.
Identify the bag (I) and the ring (J) that is supplied closed with the
5
connector (K) already assembled. Separate one end of the ring
from one end of the connector and insert the free end through
the slit of the bag (I) until it makes a complete turn as shown in the
following image.
2
4
6
K
J
www.masterproducts.es
Fit the rubber stops (G) on the base of the feet (B).
Position the machine supported on its four feet. IMPORTANT:
The MT Professional 75 model must be handled by two
people due to its weight.
Rejoin the end of the ring with the connector and hide the
connector inside the slit of the bag.
25