Kohler K-72218 Guía De Instalación Y Cuidado página 11

Sensor
Handle LED
Faucet Operation
Rotate the handle outward to the open position to start water
flow. The handle LED will illuminate to indicate that the sensor is
functioning.
Adjust the handle to the desired water temperature.
Wave your hand under the spout to turn the water OFF.
NOTE: Some objects that are clear and certain colors are not
detectable by the sensor. Always use your hand for sensor testing.
Wave your hand under the spout again to restart the water flow.
If needed, refer to the "Handle LED Adjustment" section for more
information.
NOTE: For extended periods of nonuse, the handle should be
returned to the closed (upright) position. The handle LED will turn
OFF, indicating that water flow is not available.
NOTE: The green and yellow LEDs are only visible from inside the
cover on the circuit board.
LED Indicators
Handle LED: Illuminates when the sensor is active.
Green LED: Indicates there is power to the circuit board.
Yellow LED: Illuminates briefly when an object has been detected
by the sensor.
Kohler Co.
Manual
Override
Open Position
11 1276182-2-A