System Menu; Executing Initial Setup; Setting The Time; Using The Sleep Timer - Samsung 4+ Serie Manual De Usuario

Preference Features

System Menu

•

Executing initial setup

¦
Setup
O MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV
for the first time or when resetting the unit.
✎
Execute the initial setup following instructions that the TV
guides.

Setting the Time

¦
Time
O MENUm → System → Time → ENTERE
The current time will appear every time you press the
button.
• Clock: Setting the clock is for using various timer features
of the TV.
✎
If you disconnect the power cord, you have to set the
clock again.
Clock Mode: Set up the current time manually or
automatically.
–
Auto: Set the current time automatically using the
time from a digital channel.
✎
The aerial must be connected in order to set the time
automatically.
–
Manual: Set the current time manually.
✎
Depending on the broadcast station and signal, the
auto time set up may not be correct. In this case, set
the time manually.
Clock Set: Set the Date and Time.
✎
Available only when Clock Mode is set to Manual.
✎
You can set the Date and Time directly by pressing
the number buttons on the remote control.
Time Zone (depending on the country): Select your time
zone.
✎
This function is only available when the Clock Mode
is set to Auto.
✎
When selecting Manual in Time Zone, GMT and
DST will be activated.
[PF4000-SH]BN68-04821H-03Cover.indb 19

Using the Sleep Timer

¦
O MENUm → System → Time → Sleep Timer →
ENTERE
• Sleep Timer t: Automatically shuts off the TV after
a preset period of time. (30, 60, 90, 120, 150 and 180
minutes)
✎
Use the ▲/▼ buttons to select a period of time, and
then press ENTERE. To cancel the Sleep Timer,
select Off.

Setting the On / Off Timer

¦
O MENUm → System → Time → On Timer <or> Off
Timer → ENTERE
• On Timer: You can set up three separate On Timer
configurations. (On Timer 1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at your convenience. If you
INFO
select Manual, you can set up the day you want to activate
the timer.
✎
The c mark indicates the day you've selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: To select the source of the content that will play
when the TV turns on. You can:
–
Select TV and have the TV display a specific air or
cable channel.
–
Select USB and have the TV play back photo or
audio files from a USB device.
–
Select a source on your TV that you have connected
a set-top box to, and have the TV display a channel
from the set-top box.
✎
The USB device must be connected to your TV
before you can select USB.
✎
If you select a source other than TV or USB, you
must:
• Have a cable or satellite set-top box attached to
that source
• Set the set-top box to the channel you want to
watch when the TV goes on
• Leave the set-top box turned on.
✎
When you select a source other than TV or USB, the
Aerial and Channel options will disappear.
19
English
2013-07-25 10:44:12