Safety And Accident Prevention; Consultation Guide; Responsibility; General Recommendations - river systems MISTRAL 650R Manual De Usuario

riversystems.it

2. SAFETY AND ACCIDENT PREVENTION

2A - CONSULTATION GUIDE
The machine subject of this manual is equipped with the following safety signs.
riversystems.it
SYMBOL
EN
riversystems.it
riversystems.it
riversystems.it
riversystems.it
2B - RESPONSIBILITY
The manual is to be considered an integral part of the machine and must be kept until the end of its life. The
manufacturer is relieved of any liability deriving from:
• Improper, erroneous or unreasonable use of the machine;
• Use contrary to current national regulations;
• Incorrect installation of the machine;
riversystems.it
• Power supply defects;
• Shortcomings in planned maintenance;
• Unauthorized modifications or interventions;
• Use of non-original or specific spare parts and products for the model;
• Failure to comply with the instructions contained in this manual.
2C - GENERAL RECOMMENDATIONS
riversystems.it
MACHINE IN PROCESSING PHASE
It is strictly forbidden to remove or tamper with the safety devices of the machine. Under no circumstances
must sealed components or machine parts be tampered with; this could give the possibility to access devices
which, once modified without authorization, could cause dangerous situations.
MACHINE UNDER MAINTENANCE OR REPAIR
Maintenance must be carried out with the machine off and unplugged. If technical assistance is required,
River Systems srl recommends to contact its customer service directly; the use of original spare parts will be
guaranteed as well as safe operating.
riversystems.it
2D - WORK ENVIRONMENT
The machine can be used after having been correctly installed.
The place of installation must be:
• Indoors and protected from the elements;
• Easily washable;
• With a flat, horizontal and non-yielding floor;
riversystems.it
• Equipped with a level of lighting in compliance with current legislation;
• Compatible with machine specifications, shown in the relative table;
• Compliant with local regulations and legislation on health and safety in the workplace;
•
Able to guarantee the necessary room around the machine, as indicated in paragraph 5A.
The power cord must not be an obstacle for the operator and must not be accidentally cut or damaged.
riversystems.it
riversystems.it
riversystems.it
MEANING
Obligation to use eye and
hearing protection.
riversystems.it
Presence of live parts.
Presence of rotating
elements.
Cut hazard.
Pay attention.
Read the user manual
riversystems.it
carefully.
riversystems.it
riversystems.it
riversystems.it
Warning label.
Grinding group, warning label.
riversystems.it
riversystems.it
riversystems.it
- 18 -
riversystems.it
POSITION
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
Copyright © River Systems - All rights reserved
riversystems.it
r
r