Listening To Audio - BlueAnt T2 ENDURE Guia De Inicio Rapido

10

Listening to Audio

The T2 supports A2DP audio streaming: if your phone or Bluetooth
device supports the A2DP profi le then you can simply start playing
music or any other audio (including directions from a GPS application
on the phone) and it will automatically transfer to the headset.
The audio will mute automatically if you make or receive a phone call,
and resume when the call ends.
Note: The T2 only supports A2DP bluetooth audio streaming from one
phone at a time.
11
Reset your T2
If you are having problems with the T2, you can reset it and start
again:
1. Disconnect the T2 from your phone by deleting the pairing from
your phone's Bluetooth menu.
2. Turn your phone off and back on again to clear its memory.
3. With the T2 switched on, but not connected to any phones, hold
down all three buttons
about 3 seconds.
The T2 will reset and go straight to pairing mode. You will now need
to pair your phone with the T2 again.
(Vol +, Vol -, and the Command button) for