Troubleshooting - BLACK&DECKER MATRIX BDCMTHPI Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

VALVE ADAPTOR

• Position the lever (A1) of the valve adaptor straight up. Push the

valve adaptor down over the threaded section of the valve stem,

or over one of the accessories provided with your inflator as

show in figure A.

• When the adaptor is down all the way, press the lever down to

lock it in place.

• To release the adaptor from valve stem or accessory nozzles,

lift the lever straight up and pull the adaptor off.

• Operate your Inflator only with the nozzles included.

• Make sure that the universal valve adaptor lever is firmly

locked down in place before turning the Inflator on.

NOTE: Many inflatables, especially air mattresses, have an

internal flap that prevents air loss during inflation. Unless this

flap is displaced by the nozzle the mattress will not inflate. Push the nozzle firmly into the valve to

ensure that you push this flap out of the way.

hOSE AND PRESSURE GAUGE

NOTE: Never carry the inflator by the hose.

• The pressure gauge, which is located on the hose, will give a pressure reading in P.S.I. (pounds

per square inch) as well as in Bar.

• In the case of tire inflating, it is recommended that the pressure reading be verified by checking

with a separate tire gauge.

• To obtain a more accurate pressure measurement, turn the Inflator OFF when reading the gauge.

wARNING

Do not leave inflator running unattended. It could burst tires or other items.

NOzzLE USAGE

• Place the valve adaptor over the stem of the nozzle as indicated in the "Valve Adaptor" section above.

• Place the needle nozzle or beach ball nozzle into the object to be inflated.

• When finished, remove the nozzle from the valve adaptor and store in the accessory storage compartment.

Problem

• Unit will not start.

For assistance with your product, visit our website www.blackanddecker.com for the location

of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

NOTE: Refer to Power Unit instruction manual for troubleshooting solutions regarding opera-

tion of the Power Unit.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;

never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized service

centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

wARNING

The use of any accessory not recommended for use with this tool could be

hazardous.

Recommended accessories for use with your tool are available from your local dealer or authorized

service center. If you need assistance regarding accessories, please call: 1-800-544-6986.