Suzuki 95400-2181 Serie Instrucciones De Instalación página 3

Installation
NOTE: The following steps are for
of
Key Cylinder
1. Remove the nut and the plate.
NOTE: Use
2. Insert the key cylinder into the
hole of the side case.
3. Install the plate and tighten the
nut to the specified torque.
NOTE: When fitting the plate to
Tightening torque
Nut: 2.5 N·m (0.25 kgf-m, 1.8
lbf-ft)
the right side of the motor-
cycle. Follow the same
steps for the left side.
the key
marked with "R" to the right
case and with "L" to the left
case.
the key cylinder, face the
marked side toward the
key insertion side.
Washer
cylinder
Nut
Plate
Key cylinder
Washer
Nut
GENUINE SUZUKI ACCESSORIES
3/9
Mark
Hole
Mark
Plate