VERTO 52G506 Manual De Instrucciones página 8

• Disconnect the charger from power supply before starting any
maintenance or cleaning.
• Do not use charger when placed on flammable surface (e.g. paper,
textiles) or in proximity of flammable substance. Greater charger
temperature when charging increases risk of fire.
• Check condition of charger, cable and plug before each use.
Do not use the charger if any damage is found. Do not try
to disassemble the charger. All repairs should be made by an
authorized service workshop. Improper charger assembly may cause
electric shock or fire.
• Children and persons who are physically, emotionally or mentally disabled
and other persons, whose experience or knowledge is insufficient to use
the charger while following all safety rules should not use the charger
without supervision of person responsible for their safety. Otherwise there
is a risk of improper use and injuries in consequence.
• When the charger is not in use, it should be disconnected from the
mains network.
CAUTION! The design is assumed to be safe, protection measures
and additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
Li-Ion batteries may leak, set on fire or explode when heated to high
temperature or short-circuited. Do not store the batteries in a car
in hot and sunny days. Do not open the battery. Li-Ion batteries
contain electronic protection devices that, if damaged, may cause
fire or explosion of the battery.
EXPLANATION OF USED SYMBOLS
1 2
6 7
11 12
16 17
1. CAUTION! Use precaution measures.
2. Read instruction manual, observe warnings and safety conditions
therein!
4. Use personal protection equipment (protective goggles, earmuff
protectors).
5. Remove the battery from the device before starting any
adjustments or cleaning related tasks.
6. Use protective gloves.
7. Keep the tool away from children.
8. Use protective clothes.
9. Make sure the persons nearby stay at safe distance from the garden
tool and do not get harmed by objects from the stream of air.
10. The garden tool is designed for outdoors use
11. Keep safe distance from working garden tool.
12. Protect the tool from moisture.
13. When the device is operating do not put hands into its openings
14. Disconnect the charger before repairs.
15. Protection class 2.
16. The charger is designed to operate indoors in dry environment.
17. Do not throw cells into fire.
3 4 5
360°
8 9 10
13 14 15
18 19
18. Maximum permissible cell temperature.
19. Recycling
CONSTRUCTION AND USE
Cordless blower is a hand held device. Drive consists of a DC commutator
motor. The cordless blower is a device designed for clean up works
around house and in home harden. It is perfect for cleaning and removal
of leaves, grass after mowing, needles of coniferous trees that fall on
terraces, pavements and paths. The device is not designed for industrial
applications, it can be used outdoors.
Use the tool only in accordance with its purpose.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Nozzle
2. Nozzle lock button
3. Switch lock button
4. Switch
5. Battery locking button
6. Battery
7. LED diodes
8. Lock screw
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Battery
2. Charger
3. Nozzle
4. Screw
PREPARATION FOR OPERATION
INSTALLATION / DEINSTALLATION OF NOZZLE
• To install the nozzle (1) on the blower, slide it onto the stub until the
nozzle lock button (2) snaps on (fig. C), then secure with a screw (8)
(fig. D).
• To disassemble undo the screw (8). Press in the nozzle lock button (2)
and slide off the nozzle (1) from the stub (fig. E).
REMOVING AND INSERTING THE BATTERY
• Push battery locking button (5) and slide out the battery (6) (fig. A).
• Slide charged battery (6) into the handle holder, you should hear
when the battery lock button (5) snaps.
BATTERY CHARGING
The device is supplied with partially charged battery. The battery should
be charged in ambient temperature between 4°C and 40°C.
New battery, or one that has not been used for a long time, will reach full
efficiency after approximately 3 to 5 charge/discharge cycles.
• Remove the battery (6) from the device (fig. A).
• Connect the charger to the battery (6) (fig. B).
• Connect the charger to mains socket (230V AC).
Two LEDs (7) are located in the battery casing (6) (fig. B), and meaning of
the lighting is described below.
• Red diode lit – voltage supplied and informs that charging is in
progress.
• Green diode lit (red diode turns off ) – the battery is fully charged.
Once the battery has been charged, the green diode stays on until you
will disconnect the charger from mains network.
Batteries heat up very strongly during charging process. Do not
work just after charging has been finished, wait until the battery
cools down to room temperature. It will prevent battery damage.
8
– 2 pcs
– 1 pce
– 1 pce
– 1 pce