Safety; Intended Use - WIKA TSD-30 Manual De Instrucciones

2. Safety

2. Safety
WARNING!
EN
Before installation, commissioning and operation, ensure that the appropriate temperature
switch has been selected in terms of measuring range, design and specific measuring
conditions. Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
Observe the working conditions in accordance with chapter 3 „Specifications".
Further important safety instructions can be found in the individual chapters of these
operating instructions.

2.1 Intended use

The temperature switch is used to convert temperature into an electrical signal indoors and outdoors.
The instrument has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specifications contained in these operating instructions must be observed. Improper
handling or operation of the temperature switch outside of its technical specifications requires the
instrument to be taken out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
Use of accessories and spare parts
It is recommended to use original accessories and original spare parts from WIKA. Using accessories
and spare parts from third parties can lead to damage to the instrument or accidents, due to quality
defects or other reasons. WIKA assumes no liability for damage or accidents caused by a malfunction or
unsuitability of accessories and spare parts which do not originate from WIKA (e.g. non-compliance with
the IP ingress protection of connectors). No warranty claims can be made which arise due to a malfunc-
tion or unsuitability of any accessory or spare part from a third party.
6 WIKA operating instructions temperature switch, model TSD-30