Operating Instructions - Kapro Prolaser 894 Visi-Cross Manual Del Usuario

OPERATING INSTRUCTIONS

To get the most out of your Prolaser
carefully to the following instructions.
NOTE
Avoid setting up the laser level near heavy machinery or sources of
vibration that may adversely affect the leveling of the laser.
Horizontal Line
The laser level can generate a horizontal line.
Set up the Cross Laser approximately level on a flat, vibration-free surface
1.
or a tripod. The laser level can compensate for up to ± 4° from the
horizontal plane.
2.
Turn the lock to ON. The power indicator will light up.
3. Press the H button on the keypad on the top of the unit. The laser level
will generate a horizontal line. If it is set up outside the ± 4° self-leveling
range the laser beam will flash and an alarm will sound.
To activate Detector (Pulse) mode, press the P button on the keypad. The
4.
Detector mode indicator will light up.
Before moving the laser level, press the H button again and turn the lock
5.
to OFF.
® ™
894 Visi-Cross , please adhere
10