Checking The Package Contents; Installing The Ait Autoloader - Sony StorStation LIB-D81 Guia De Inicio Rapido

Checking the Package
Contents
After opening the box, make sure that all the following
items are present. Contact your dealer if anything is
missing.
The Operating Instructions for this manual are provided
in PDF format on the CD-ROM. After setting up the
equipment as described in this manual, please read the
Operating Instructions (PDF) on the CD-ROM and
make necessary settings.
• LIB-D81 (1)
• Power cable (1)
• SCSI terminator (1)
• Cleaning cartridge (1)
• Quick Start Guide (1)
• CD-ROM (containing this document) (1)
Notes
• In addition to the above, other documentation and/or
documents may be included in the package.
• These instructions (this Quick Start Guide) are also
included in PDF format on the CD-ROM.
Installing the AIT
Autoloader
The autoloader weighs about 7 kg (15.4 lb.) and has the
following dimensions. Before installing the autoloader,
make sure that the surface is appropriate.
N
Note
Install the AIT autoloader on a horizontal surface near
an AC power outlet. Also leave a gap of about 150 mm
(5.9 in.) behind the rear of the unit to allow air to
circulate.
170 mm
(6.7 in.)
Caution
Make sure that you position the AIT autoloader as
indicated in the illustration. Correct operation is not
guaranteed if you place the AIT autoloader on its side.
50 mm (2.0 in.)
170 mm (6.7 in.)
Front
350 mm (13.8 in.)
50 mm (2.0 in.)
220 mm (8.7 in.)
224 mm (8.8 in.)
(including
rubber feet)
350 mm (13.8 in.)
Rear
150 mm
(5.9 in.)

Checking the Package Contents

GB
5