Tabla de contenido
• Preparing the area where you want to remove hair:
- If the hairs are long trim to approximately 1cm.
- Dry the area thoroughly to ensure any trace of
deodorant or perspiration are removed.
- If you are not used to epilating your underarms
and bikini line with an epilator, we recommend
you use the Sensitive Area accessory.
- Push the Sensitive Area accessory onto the
epilator head until it clicks.
- Move the switch to the on position "1".
Shave against the lie of the hair, slowly and without pressing, with the shaver perpen-
dicular to your skin.
For the armpits:
First from bottom to top ...
... Then from top to bottom.
Important :
a) Keep your arm raised and stretched throu-
ghout the hair removal process.
b) Stretch the skin to make it easier.
For the bikini line:
Important:
Make sure the skin is
stretched properly.
Remove the Sensitive Area accessory and unplug your epilator after each use.
9. CLEANING THE APPLIANCE
• Cleaning the epilator head:
2
1
running water by turning it for 5 to 10 seconds.
4. Shake the epilator head vigorously and dry it
with a towel before fitting it to the epilator
again. You can also use the small cleaning
brush supplied.
11
CLIC!
2
1. Unplug the epila-
tor.
2. Press the release
button on the head
and remove the epi-
lator head.
3. Rinse the epilator
head under cold
GB
1
Tabla de contenido
