Environmental Protection; Troubleshooting - Ratio 7993 X 305 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

f) If a power tool cannot be used in humid
places, it must be connected to a power
supply that is protected by ground fault
switches.
DISPOSAL OF AN
EXHAUSTED BATTERY
PACK
To preserve natural resources,
please recycle or dispose of the
battery pack properly. This battery
pack contains Lithium batteries.
Consult your local waste authority for
information regarding available recycling
and/or disposal options. Discharge your
battery pack by operating your machine,
then remove the battery pack from the
machine housing and cover the battery
pack connections with heavy-duty adhesive
tape to prevent short circuit and energy
discharge. Do not attempt to open or remove
any of the components.
TROUBLE SHOOTING
Problem
Possible cause Solution
Battery
1. Charger not
will not
plugged into a
charge
working outlet.
2. Surrounding
air temperature
is too hot or too
cold
Switch
Forward/
can not be
Reverse switch
pressed
at middle
position
Screwdriver
Battery is out of
stops
power
during
driving
screws
36
1. Plug charger into
a working outlet.
Check current by
plugging in a lamp.
2. Move charger to
where temperature
is between 15°C
to 25°C.
Make sure switch
is on Forward or
Reverse rotation
according to project
need.
Make sure
screwdriver is fully
charged before
using it.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
MAINTENANCE
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working
controls free of dust. Occasionally you may
see sparks through the ventilation slots.
This is normal and will not damage your
power tool.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least
12 months from purchase. Please keep your
receipt as proof of purchase. If the product is
found to be defective within the duration of
the guarantee period, we will either replace
all defective parts or, at our discretion,
replace the unit free of charge with the same
item or items of a greater value and /or
specification.
This warranty is invalid where defects are
caused by or result from:
1.Misuse, abuse or neglect.
2. The tool has not been used for rental
purposes.
3.Repairs attempted by unauthorised repair
centres.
4.Damage caused by foreign objects,
substances or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est
Tabla de contenido
loading

Tabla de contenido