Product Description And Specifications - Bosch GSA 18V-32 Professional Manual Original

OBJ_BUCH-2835-002.book Page 14 Tuesday, November 15, 2016 3:41 PM
14 | English
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sawing wood, plastic, metal and
building materials while resting firmly on the workpiece. It is
suitable for straight and curved cuts. The saw blade recom-
mendations must be observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Saw blade*
2 Base plate
3 Stroke rod
4 Clamping lever for saw blade release
5 Utility hook
6 Rotary switch for pendulum action (3-level)
1 609 92A 2L0 | (15.11.16)
7 Thumbwheel for stroke rate preselection
8 On/Off switch
9 Lock-off button for On/Off switch
10 Battery pack
11 Battery charge-control indicator
12 Button for charge-control indicator
13 Unlocking button for footplate adjustment
14 "PowerLight" lamp (dual LED)
15 Handle (insulated gripping surface)
16 Battery unlocking button
17 Battery receptacle
18 Saw blade holder
*Different saw blades are included in the delivery depending on
the country version.
Technical Data
Sabre saw
Article number
Dimensions
with battery/without battery
– Length
– Width
– Height
Rated voltage
Stroke rate at no load n
0
Tool holder
Stroke
Cutting depth, max.
– in wood
– in non-alloy steel
– Pipe diameter
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation* and
during storage
Recommended batteries
Recommended chargers
* limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
GSA 18V-32
3 601 FA8 1..
mm 482/482
mm 101/101
mm 218/198
V= 18
-1
min 0–2500
SDS
mm 32
mm 230
mm 20
mm 175
kg 3.9
°C 0...+45
°C –20...+50
GBA 18V..
GBA 18V... W
AL 18..
GAL 3680
GAL 18... W
Bosch Power Tools