Additional Features - OHAUS Scout SPX Serie Manual De Instrucciones

EN-14

4.6 Additional Features

Weigh Below Hook
The Scout Balance is equipped with a weigh below hook for weighing below the balance.
The weigh below hook is located at the reverse side of the battery cover as shown below.
To use this feature, remove the red protective cover underneath for the weigh below opening.
Weigh below opening
The balance can be supported using lab jacks or any other convenient method. Ensure the
balance is level and secure and that the transportation lock has been released. Power on the
balance, then use a string or wire to attach items to be weighed.
Connecting the Interface
Use an optional interface connectivity kit to
connect the balance either to a computer or a
printer.
Below Interface kit accessories are available:
RS232, USB Host, USB Device, Ethernet,
®*
Bluetooth .
* Interface kits may vary according to local regulations
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by OHAUS is under license.
Attention: Before turning the balance over, remove the Pan and Pan
Support (if present), and turn the transportation lock to "locked" position to
prevent damage.
Weigh Below Hook
Figure 4-2. Weigh below
Figure 4-3. Weigh below application
SCOUT
Weigh Below Hook installed
AC Adapter jack
Interface connection
Figure 4-4. Rear of the balance
TM
SERIES BALANCES - SPX
Security slot