Safety Instructions - Flex LE 12-3 100 WET Instrucciones De Funcionamiento Originales

LE 12-3 100 WET/L 12-3 100 WET

Safety instructions

t^okfkd>
oÉ~Ç=~ää=ë~ÑÉíó=áåëíêìÅíáçåë=~åÇ=çíÜÉê=
áåëíêìÅíáçåëK=c~áäìêÉ=íç=çÄëÉêîÉ=íÜÉ=ë~ÑÉíó=
áåëíêìÅíáçåë=~åÇ=çíÜÉê=áåëíêìÅíáçåë=ã~ó=êÉëìäí=
áå ~å=ÉäÉÅíêáÅ=ëÜçÅâI=ÑáêÉ=~åÇLçê=ëÉêáçìë=áåàìêáÉëK=
hÉÉé=~ää=ë~ÑÉíó=áåëíêìÅíáçåë=~åÇ=çíÜÉê=
áåëíêìÅíáçåë=áå=~=ë~ÑÉ=éä~ÅÉ=Ñçê=íÜÉ=ÑìíìêÉK
Combined safety instructions for
grinding, sanding and polishing:
 This electric power tool must be used as
a grinder, sander and polisher. Observe all
safety information, instructions, diagrams
and data which you receive with the power
tool. If you do not observe the following
instructions, an electric shock, fire and/or
serious injuries may occur.
 This electric power tool is not suitable for
use with wire brushes and for cut-off
grinding. If the electric power tool is not
used as intended, the user may be
exposed to hazards and may be injured.
 Never use accessories which the
manufacturer did not intend or
recommend especially for this electric
power tool. Just because you can attach
the accessory to your electric power tool
does not guarantee safe use.
 The permitted speed of the insertion tool
must be at least as high as the maximum
speed indicated on the electric power tool.
An accessory which rotates faster than
permitted may shatter and fly off.
 Outer diameter and thickness of the
insertion tool must correspond to the
dimensions of the electric power tool.
Incorrectly measured insertion tools
cannot be adequately shielded or
controlled.
 Grinding discs, flanges, sanding pads or
other accessories must fit exactly on the
grinding spindle of your electric power
tool. Insertion tools, which do not fit
exactly on the grinding spindle of the
electric power tool, rotate unevenly,
vibrate violently and may result in loss of
control.
 Do not use any damaged insertion tools.
Before use, always check insertion tools
for splinters and cracks, sanding pad for
cracks, wear and severe abrasion, wire
brushes for loose or broken wires. If the
electric power tool or the insertion tool is
dropped, check for damage or use an
undamaged insertion tool. When you have
checked and inserted the tool, ensure that
you and anybody in the vicinity remain
outside the plane of the rotating insertion
tool and leave the power tool running for
one minute at maximum speed.
Damaged insertion tools usually break
during this test time.
 Wear personal protective equipment.
Depending on the application, wear full
face protection, eye protection or goggles.
If appropriate, wear a dust mask, hearing
protection, protective gloves and/or a
special apron which protect you from
small sanding and material particles.
You should protect your eyes from foreign
objects which are ejected for different
applications. Dust and respirator masks
must filter the dust which is generated
by the power tool for the particular
application. If you are exposed to loud
noise for a prolonged period, you may
suffer hearing loss.
 Ensure that other persons are situated at a
safe distance from the work area. Anyone
who enters the work area must wear
personal protective equipment.
Fragments of the workpiece or broken
insertion tools may fly off and cause
injuries even outside the direct working
area.
 If the insertion tool is at risk of coming into
contact with concealed power cables or
the power cord itself, hold the power tool
by the insulated grip surfaces only.
Contact with a live cable may also cause
metal parts of the appliance to become
live and result in an electric shock.
 Keep the power cord away from rotating
insertion tools. If you lose control of the
appliance, the power cord could be
severed or become caught and your hand
or arm may strike the rotating insertion
tool.
15