Instruction Manual - AKO-Agrartechnik BA-1074 Manual De Instrucciones

Operating Instructions
1
2
3
Normal operation with
1 Warning light ( flashing = equipment switched on )
3 Earth connection
5 Fixing screws for battery compartment cover
7 ON / OFF switch
Description of function
After inserting the two batteries and connecting fence and earth, switch the unit on.. If the warning
light (1) flashes in sync with the pulses, the equipment is working
If the warning light (1) does not flash, please check the batteries first for sufficient voltage
(minimum voltage is 2,5 Volt) and correct insertion and polarity. If the problem cannot be fixed,
please consult an expert.
Important Notes:
The hook (8) provided must be fastened to the battery compartment cover (4) using the screws (6).
The equipment must be suspended vertically with the earth and fence connections pointing
downwards. See illustration above! Alternatively, the hook (8) can be fixed in the holes (9).
For battery exchange, remove the knurled thumbscrews (5) first, , . then the cover, . Please replace
discharged batteries immediately and dispose properly. If the unit is not used for extended periods,
always remove the batteries!
An earthing/support rod can be purchased as an accessory from your dealer quoting No.44657.
The equipment gives no warning if the electric fence is faulty.
This equipment carries a 3-year warranty in accordance with our Warranty Terms &
Conditions!
Please see the attached Operating Instructions for safety tips, earthing, commissioning,
warranty terms and conditions and potential fault sources!
SERVICE Addresses:
Please contact your specialist dealer
9
2 x 1.5 V
single-cell batteries (Type D)
6
2 Fence connection
4 Battery compartment cover
6 Fixing screws for hook
8 Hook for suspension mounting
3
-EN-
8
7
6
5
4
Version : 2014.2