Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CORDLESS DRILL
50G187
CAUTION: BEFORE USING THE POWER TOOL READ THIS
MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIFIC REGULATIONS REGARDING SAFE USE OF
DRILL
• Use ear protectors and safety goggles when
operating drill. Exposure to noise may cause hearing loss.
Metal dust and other particles floating in the air may cause
permanent eye injury.
• Use additional handles supplied with the tool. Loss of
control may cause operator personal injury.
• When carrying out tasks when work tool can hit
hidden electric wires, hold the tool by insulated
areas of the handle. Contact with power supply line may
transfer voltage to metal parts of the tool and cause electric
shock.
ADDITIONAL RULES FOR SAFE DRILL OPERATION
• Use only recommended battery and charger.
• Always keep the battery away from sources of fire. Do
not leave the battery for a long time in high temperature
(in direct sunlight, in proximity of heaters and wherever
the temperature exceeds 50
• Battery charging process should be supervised by the
user.
• Avoid charging the battery in temperature lower than
0
o
C.
• Charger supplied with the drill is designed for operation
with this product only. Do not use it for other purposes.
• Do not put any metal objects into the charger.
• Do not change direction of spindle rotation when the
tool is operating. Otherwise drill may be damaged.
• Use soft, dry cloth to clean the drill. Never use detergents
or alcohol.
• Disconnect charger from power supply before cleaning.
• If you intend to charge more than one battery
successively, make a 30 minute break between charges.
SPECIAL SAFETY CONDITIONS FOR CHARGER
OPERATION
• This equipment is not intended for use by persons
with restricted physical, sensory or mental capabilities
(including children) or persons who have no experience
or are unfamiliar with the equipment, unless work is
supervised or carried out in accordance with equipment
use instructions handed over by persons responsible for
safety.
• Pay attention to children so they don't play with the
equipment.
• Check condition of charger, cable and plug before each
use. Do not use the charger if it is damaged.
• Keep this manual. It contains important drill use and
safety instructions.
• Before using the charger, read all relevant information
contained within this manual, see markings on the
charger and the product it is designed for.
• To reduce the risk of potential body injury use the
o
C).
charger for charging Ni-Zn batteries only. Other type
batteries may explode and cause personal injury or
material damages.
• Do not expose the charger to humidity or water.
• Use of any connecting elements not supplied or not
recommended by the manufacturer of the charger may
cause fire, personal injury or electric shock.
• Make sure the power cord is not located in a pathway,
is not exposed to treading or other danger (e.g. strong
tension).
• Do not use extension cord unless absolutely necessary.
Use of improper extension cord may cause fire or electric
shock. If it is necessary to use extension cord, first make
sure that:
– Extension cord socket matches plug prongs of the
original charger power cord.
– Extension cord is in good technical condition.
• Do not use the charger with damaged cord or plug.
Damage should be repaired by a qualified person.
• Do not use the charger after it has been hit, dropped or
otherwise damaged. Entrust the testing and potential
repair to authorized service workshop.
• Do not try to dismantle the charger. All repairs should
be made by an authorized service workshop. Improper
charger assembly may cause electric shock or fire.
• Disconnect the charger from power supply before
starting any maintenance or cleaning.
• In case of battery damage or improper use it may
produce gas. Ventilate room and seek medical attention
in case of medical symptoms.
• Keep the charger clean. Dirt can be the cause of electric
shock.
• Do not use charger when placed on flammable surface
(e.g. paper, textiles) or in proximity of flammable
substance. Greater charger temperature when charging
increases risk of fire.
When the charger is not in use, it should be
disconnected from mains network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures
and additional safety systems are used, nevertheless
there is always a small risk of injuries at work.
Ni-Zn batteries may set on fire or explode when heated
to high temperature or short-circuited. Do not store
the batteries in a car in hot and sunny days. Do not
open the battery.
Explanation of used symbols
1
2
5
6
Max.
50°C
9
10
10
3
4
7
8
11
Tabla de contenido
