Trouble Shooting - Deltafox DP-CRS 2022 Traducción Del Manual De Instrucciones Original

Trouble Shooting

Problem
Appliance
won't start
Intermittent
operation
Poor sawing
performance
Saw blade
quickly be-
comes blunt
Possible cause
Battery ( 11) discharged
Battery ( 11) not inserted
Switch lock ( 8) has not
been operated properly
On/Off switch (
tive
Internal loose contact
On/Off switch (
tive
Saw blade unsuitable
for the work piece to be
worked on
Saw blade blunt
Incorrect sawing speed
Low battery power
Saw blade unsuitable
for the work piece to be
worked on
Too much pressure applied
Sawing speed too high
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Switch on (see "Operation")
Send in to Service Centre for repair
9) defec-
Send in to Service Centre for repair
9) defec-
Insert a suitable saw blade
Insert a new saw blade
Adjust sawing speed
Charge battery (
ing process")
Insert a suitable saw blade (see "In-
stallation")
Reduce the pressure
Reduce the sawing speed
GB
11) (see "Charg-
31