Special Safety Directions For The Device - Deltafox DP-CRS 2022 Traducción Del Manual De Instrucciones Original

Special Safety Directions for the
device
1) SPECIAL SAFETy INSTRUCTIONS
FOR RECIPROCATING SAWS
• Hold the electric tool by the insulat-
ed gripping surfaces when perform-
ing work in which the cutting tool
may come into contact with hidden
wiring. Contact with a live wire can
also cause a charge in metal parts
of the device and result in an electric
shock.
• Keep hands away from the sawing
area. Do not reach underneath the
work piece. Upon contact with the
blade there is a risk of injury.
• Only when the electric tool is
turned on should the sawing blade
be moved against the work piece.
There is a risk of kickback if the tool
insert jams in the work piece.
• Make sure that the base plate is
securely placed against the work
piece during sawing. The saw blade
can tilt and lead to loss of control over
the power tool.
• After you have finished work, turn
the power tool off and do not pull
the saw blade out of the cut until it
has come to a standstill. In this way
you will avoid any kickback and can
safely put down the power tool.
• use only undamaged saw blades
in perfect condition. Bent or blunt
blades can break, adversely affect the
cut or cause kickback.
• Do not brake the saw blade after
switching the device off by applying
side pressure. The saw blade may be
damaged, break or cause a kickback.
• Tighten the material firmly. Do not
support the work piece by hand or
foot. Do not touch any objects or
the ground with the saw running.
There is a risk of kickback.
• use suitable detectors in order to
find hidden supply lines or ask the
local utility company. Contact with
electrical cables can lead to electric
shock and fire, contact with a gas
pipe can result in an explosion. Dam-
age to a water pipe can lead to prop-
erty damaged and electric shock.
• Hold the power tool tightly with
both hands while working and en-
sure a secure footing. The power
tool is guided more securely with both
hands.
• Secure the work piece. A work piece
that is retained with clamping devices
or a vice is held more securely than
with your hand.
• Wait until the power tool has
stopped before placing it down. The
tool insert can tilt and lead to loss of
control over the power tool.
• Do not saw any materials (e.g. lead-
based paints and coatings or ma-
terials containing asbestos) whose
dust can be harmful.
2) SPECIAL SAFETy DIRECTIONS
FOR BATTERy-OPERATED TOOLS
• Ensure that the device is switched
off before inserting the battery.
Inserting a battery into a power tool
that is switched on may result in ac-
cidents.
• recharge the batteries indoors only
because the battery charger is de-
signed for indoor use only. Risk of
electric shock.
• To reduce the electric shock haz-
ard, unplug the battery charger
from the mains before cleaning the
charger.
GB
25