Technical Data - Mesko MS 8147 Manual De Uso

GUIDELINES FOR SAFETY AND OPERATION OF LUGGAGE SCALE
1. Avoid device contact with water and other liquids.
2. Do not leave the device under load for longer periods of time.
3. Do not use in strong magnetic field.
4. Use only to weigh objects.
DEVICE CONSTRUCTION [ FIG A]
A1 - Display
A3 - Scale handle
A5 - Battery compartment
A7 - Hook
WARNING INDICATORS [FIG B]
The warning signs may appear on device display A1.
- In the case shown on fig. B1 the device informs about exhausting battery. Replace the batteries according to
section BATTERY REPLACEMENT
- Figure B2 shows the message displayed if the device is overloaded (weight above 50kg). Remove at least part
of the load.
BATTERY REPLACEMENT
Device operates on 3V CR2032 battery
1) Remove the battery compartment A5 while holding the scales by the handle A3
2) Remove the used battery
3) Insert a new battery, keeping the polarity shown on the figure
4) Reinsert the battery compartment C5
SCALE OPERATION
1) After pressing A2 button once, the display A1 should show the 0 value. If this is not the case, reset the device
by pressing button A2
2) Put the strip A6 through the handle of the weighed luggage
3) Attach the hook A7 to the holding bracket A4, so that the weighed luggage is held by the strip A6
4) Lift the luggage, holding the scale by the scale handle A3
5) After 2-3 seconds the scale will sound double beep, indicating the weighing is finished. Read the luggage
weight on the scale display.
6) After use disattach the hook A7 and remove the luggage from the strip A6
7) The unloaded device will automatically switch off after 2 minutes
MEASUREMENT SCALE CHANGE
The device indicates the weight of weighed luggage in kilograms or pounds. The indication kg or lb is shown on
the display, below the weighed value. Originally, the device is set to kilograms. In order to change the
measurement scale from kilograms to pounds, or reverse, push and hold the button A2 for 5 seconds while the
device is off. The device will show temperature, 0.0 value and will change the unit.
SCALE TARRING
The device has the capability of deducting the package weight (tare) from the total weight. In order to set tare:
1) Put the strip A6 through the handle of the package that should be set as tare
2) Lift the package, holding the scale by the scale handle A3
3) Push the button A2 to turn the device on
4) After setting the tare, press once the button A2
5) The loaded device should indicate 0 weight (kg or lb), and a "T" mark should appeari in bottom left display
corner.
6) Weigh the luggage according to above mentioned procedure.
7) The package weight (tare) will be deducted from the total weight
8) The result, diminished by tare, will be shown on display A1

TECHNICAL DATA

maximum load: 50 kg or 110 Ib
measurement accuracy: 10 g or 0,2 Ib
power supply: 1x CR2032
ENGLISH
A2 - Power button
A4 - Holding bracket
A6 - Strip
ENGLISH
29
Device is made in class III of insulation.
Device is compliant with EU directives:
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label