General Warnings; Dlx Ultralite® Pro Camera Control Unit (Ccu) Assembly - Integra Pro DLX UltraLite 003285NTSC Instrucciones De Uso

Integra Luxtec
®
DLX UltraLite Pro Camera System
®

General Warnings

The user should carefully study the Operation and Service Manual before using the equipment in a clinical environment. This
Manual contains information about the proper procedures for preparing this product for its use and care. Instructions should
be followed, with special attention given to warnings, controls and user specifications. The Manual should be available to
the appropriate personnel. A warning statement in this manual identifies a condition or practice which, if not corrected or
discontinued immediately, could lead to patient or user injury, illness or death.
• The user of this product should be thoroughly familiar and trained in the assembly, use and care of this product.
• Follow the instructions and restrictions in the operating manuals of other manufacturer's equipment when they
are used in conjunction with this product.
• Before every procedure, carefully inspect the Camera to ensure it has been properly maintained and cleaned, and
that it is fully functional. DO NOT use if inspection reveals any damage such as cable cuts or loose connectors.
• To reduce the risk of fire and electric shock, do not expose electrical equipment to moisture. When cleaning,
do not immerse camera head or any electrical device in liquid. Do not use or store liquids on or above the camera.
• All electrical equipment must be used with approved hospital grade power cords and power plugs inserted
properly into grounded AC power outlets.
• Electric shock hazard. If unit is not functioning properly, DO NOT OPEN CAMERA CONTROL UNIT ASSEMBLY.
Please refer to the Repair and Return Section of this Manual for instructions.
• Do not use in the presence of flammable anesthetics, liquids, vapors, gases or dusts.
• Use care not to point any light guide directly at the eye while operating this system.
• WARNING: No modification of this equipment is allowed, including personal adjustments to the camera angle.
• Do not position the equipment so that it is difficult to remove the power plug.
• To reduce the risk of tripping, please be cautious of the cables.
DLX Pro Camera Control Unit Assembly
2
1. Power Switch/Power Indicator
2. Camera Head Connector
3. AWB Switch
4. S-Video Connector
5. BNC Video Connector
6. DC Power
4
®
1
Turns the camera control unit (CCU) on and off, and illuminates when the power is
turned on.
Connects the camera head to CCU.
Activates the white balance function.
Connects CCU to S-VIDEO input of a monitor, recording device, printer, etc.
Connects to video input of a monitor, recording device, printer, etc.
Can be used at the same time as the S-VIDEO connector.
Connects to a DC power supply.
3 4 5
6