Lutron GRAFIK Eye QS Instrucciones De Instalación página 2

Mounting
Choose a mounting method below. Mount the control interface in
an accessible location.
A. Wall Mounting. Mount the control interface directly on a wall,
as shown in the Mounting Diagram, using screws (not included).
When mounting, provide sufficient space for connecting cables.
B. Rack Mounting. Place the unit in the LUT-19AV-1U AV rack using
the screws provided with the unit. The LUT-19AV-1U will hold up
to four units.
C. C onduit Mounting. If conduit is desired for wiring, the
LUT-5x10-ENC can be used to mount one unit.
Note: Contact closure output relays click audibly when switching.
Mount where this will not cause inconvenience.
2.50
Dimensions
5.26
1.06
Terminal
blocks on
this side
3.75 in
(95.3 mm)
1.06 in
(26.9 mm)
2 QSE-IO Control Interface Installation and Operation Instructions
4.26
2.50 in
Mounting Holes
(63.5 mm)
5.26 in
(133.6 mm)
Mounting
Diagrams
Wall
Control Interface
LEDs and addressing
switches on this side
4.26 in
(108.2 mm)
LUT-19AV-1U
LUT-5x10-ENC
Wire Strip Length
3/8 in
3/8 in. (10 mm)
(10 mm)
®