NEC NP01WK Manual De Instalación Y Ajuste página 13

c Turn the left or right knob to adjust projector tilt in the
left or right direction.
- When the knob shown in black in the illustration
i s t i g h t e n e d , t h e p ro j e c t o r i s ro t a t e d i n t h e
counterclockwise direction.
d When the adjustment is complete, tighten the opposite
knob that is still loosened.
3. Adjust the horizontal tilt of the projector.
The projector adapter allows adjustment over a range of approximately ±3 degrees.
a Loosen the horizontal fixation nut (double nut) with a wrench.
b Loosen the horizontal adjust screws (left and right) with the supplied hex wrench.
- Loosen the two screws shown in black in the illustration.
c Make the adjustment by tightening the left or right screw until the top edge and bottom edge
of the image are parallel.
d When the adjustment is complete, tighten the opposite screw that is still loosened.
e Tighten the horizontal fixation nut (double nut) with a wrench.
ENG-13
c
d
ae
b
c d