System Limitations - Mobileye 6 Serie Manual Del Usuario

Pairing Process
• Access the Bluetooth settings screen on the smartphone and search for "new device."
• Turn the vehicle on, which will then turn on/activate the Mobileye 660 System. In a few seconds, the
smartphone should find a device called "Mobileye 6 BTM."
• Follow the smartphone instructions to pair with the Mobileye 660 System.
• When asked for the pass key, enter "1234." The smartphone should now be paired with the Mobileye 660 System.
NOTE:
Pairing with a smartphone is possible only during the first two minutes after the system has
been powered up. If pairing does not take place within the first two minutes, turn the vehicle
off and on to power up the system again.
After the smartphone has been paired with the Mobileye 660 System,
download and install the Mobileye Smartphone Application.
The Mobileye Smartphone Application can be downloaded from the Google
Play Store or found here:
www.mobileye.com/mobilapp

System Limitations

1. The Mobileye 6-Series Systems are intended for paved roads with lanes that are clearly marked.
2. The Mobileye 6-Series Systems cannot "see" better than the driver. It is the driver's responsibility to
be alert and aware at all times, and to depend on his or her eyesight and hearing when driving.
3. The Mobileye 6-Series Systems detect fully visible rear-ends of vehicles. Therefore, crossing,
oncoming, and passing vehicles cannot be detected.
4. The Mobileye 6-Series Systems do not guarantee 100% accuracy in detecting vehicles, pedestrians
or driving lanes, or in providing warnings for all potential road hazards. In addition, road, weather
and other conditions can adversely affect the Mobileye 6-Series Systems' recognition and response
capabilities. Any conditions that create partial or full blockage of the vision sensor's view will result
in no or reduced functionality of the Mobileye Systems. Always ensure that the vision sensor has a
clear field of view.
18