Intended Use; General Safety Rules; Safety Devices - Mondolfo Ferro TB 126 S Manual De Uso

INTENDED USE

This manual constitutes an integral part of the
product. It is intended to provide the owner
and operator with effective, safe instructions
for the COMMISSIONING, USE (SAFETY IN USE)
and MAINTENANCE of the Mod. TB 126 S - D - N
truck tyre changer.
CONSERVE THIS MANUAL WITH CARE, CLOSE TO
THE MACHINE, FOR ANY FURTHER CONSULTA-
TION BY THE OPERATORS.
The Mod. TB 126 S - D - N tyre changer is
constructed for use to remove the tyres of
trucks, agricultural tractors and earthmoving
machines from, and mount them on, the rela-
tive wheel rims.
The machine is able to handle tyres from 14"
to 26", with maximum wheel diameter 1500
mm.
All functions are electro-hydraulically powered,
with control by means of a rational, function
control console on a special articulated arm
which can be used in all working positions.
CAUTION
This machine must only be used for the
purpose for which it has been specifically
designed.
All other uses must be considered IMPROPER
and thus UNREASONABLE.
The manufacturer cannot be considered re-
sponsible for any damage caused by improper,
incorrect or unreasonable use.

GENERAL SAFETY RULES

The machine must only be used by specially trai-
ned and specifically authorised personnel. Any
tampering with or modification to the equipment
not authorised by the manufacturer in advance
relieves the manufacturer of responsibility for
any damage deriving from or traceable to such
procedures. Removal of or tampering with the
safety devices is a breach of EUROPEAN REGU-
- E - Operator's manual
nglIsh
LATIONS on safety at work.
The machine may only be used in places free
from explosion or fire hazards.

SAFETY DEVICES

-To open the door of the control panel, the
electricity supply must first be cut off using
the switch provided, as required by EEC stan-
dards.
- The logical layout of the controls avoids any
hazardous errors on the part of the operator.
- Mushroom-head emergency button to cut off
the power supply to the machine.
- All functions controlled by the control levers
are disabled when the control is released (dead-
man principle).
CAUTION
Tampering with or removing any safety device
is absolutely forbidden.
CAUTION
Carry out the assembly and installation
operations described with care. Failure to
comply with these recommendations may
cause damage to the machine and put the
operator at risk.
CAUTION
During work and maintenance procedures,
keep long hair gathered up and do not wear
loose or flowing clothes, hanging ties, nec-
klaces or rings which may become caught on
moving parts.
35