Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Trouble
Circumstances
The failure of
Indicator lighting
Low Water-exiting
Temperature
No water coming
out at the hot
water mounth
Water leakage
TROUBLE CAUSES & TREEATING METHODS
Obstacle Causes
1.The power-source plug no power or
bad contacts.
2.The interior wire materials damaged
3.Indicator damaged
4.The overheating protector making
functions.
1.Dificient heating time.
2.The Mixed water valve's temperature
adjustment is over low.
3.Temperature-controller Mal-functional. Invite the professional to mend it by
4.The heating tube damaged.
1.Halting the tap water.
2.Too low tap water pressure.
3.The temperature-controller is in mal-
functions.
4The mixed water valve broken.
5.The pipe's connections are connected
improperly.
1.The various pipe mouth's connection
positions not hermetically sealed.
2.The tank leaks the water.
NO.
1
Electric Water Heater
2
Operation Handbook
3
Inflation Bolt
4
Security Valve
5
Sealed ring
6
Filtrated gasket
7
Relief tube
PACKING LIST
Name
Dealing Methods
Inspect whether it exist the power and
the touches between the socket and
plug must be good.
Invite the professional to repair it.
Await the heating time.
Adjust the mixed water exiting
temperature to be high.
inspections.
Awaiting the tap water to provide the
water.
When awaiting the water pressure to
raise high, re-use it
Changing it.
Correctly connect it according to the
diagram's requirements.
Hermetically seal the connection
mouth well.
Invite the professional to check and
mend it.
Unit (Piece)
1
1
2
1
4
1
1
P-9
Tabla de contenido
