Premier WH-4496 Manual De Instrucciones página 13

! Our company won't load any responsibilities to this electric water heater's inappropriate installations.
! Before installing and using the new brand's electric water heater, please carefully read the entire
instructions. If not following the required methods in this instruction brochure to make installations or
sue it ,it may cause the severe hazard accidents and the property losses.
! Before opening the electric water heater's any covered decks or doing some cleaning and mending
to the electric water heater please make try to pull away the power-source plug first
! Before operating it each time, you must make the electric water heater fully fill first. After that, it can
permit you to put through the power source.
! When no tap water provides, you mustn't use the water in the tank of electric water heater.
! For the cold and frozen regions in winter, when not using it for a longer period of time, you should
make the water in the tank of electric water heater emptily occupy, The emptiness-making methods
can be seen the "Security Characteristics" in this instructions brochure.
! When the electric water heater is in normal work, the leakage pressed month of the security valve
may exist the water drops to drip out. This belongs to the normal conditions. Take care not to block
this leakage pressed exit. Yon can use the plastic pipes to lead flowing .However, you must keep it
through with atmosphere.
! The power-source outlet must have the reliable ground connections for the use.
! Double-level Temperature-limiting Protection Switch: This electric water heater possesses one
required artifice position-resetting double-level temperature-limiting protection switch. Enabling to
automatically cut off the power sources when the electric water heater is over-heat by the accidents
or the water temperature is hype-high. Guaranteeing the two poles are cut off. That ensures to be
safe.
! The Position-resetting Methods of the Double-Position Temperature-limiting Device:
1) Pull down the power-source plug
2) Make the plastic lid on the bottom(right side of horizontal style) the electric water heater to be
opened with tools.
3) Press down the white-color position resetting button on the two-positional temperature limiter.
4) Close the plastic cover.
5) Slightly reduce the temperature-setting value.
6) Reinsert the plug of the power source and put through the power source. If the above-mentioned
operations can't still let the whole unit put through the power and work normally, which indicates the
water temperature reduces.
P-2
USER'S REQUIRED READING
THE OPERATING COMMON KNOWLEDGE