Premier WH-4496 Manual De Instrucciones página 16

! This electric water heater should be mounted on the solid cement walls.
Furthermore, the places where are close to the power source's sockets and conveniently use the
water.
Cautions: Please try to use our company's fitted accessories to mount this electric water heater. After
confirming the brackets to be firmly fixed for the reliabilities, then you can hang on this electric water
heater.
Otherwise, the electric water heater may fall down from the walls, and cause the severe damaging
accidents.
! Before determining the bolt hole's position, you should guarantee the right side of the electric water
heater to be more than 200mm away the ground. This will be convenient to leave out a certain
space to maintain when it is necessary.
! Assembling Method: After selecting the proper positions well, use the fitted inflation bolt to fix the
hanging board firmly, and then hang on the electric water heater(Diagram5).
! All the pipe parts are G1/2!.Wind a certain raw material tape at the water-entering mouth sector of
the electric water heater(Blue Sign Identification)then re-install the mono-directional security valve
well.
! The remaining pipe's connection method can be referred to No.7 figure (Diagram6).
! If the user want to offer the water by poly-routes, then you can refer to the No.8 figure for connecting
the pipes (Diagram7).
! The installed walls must be solid; the inflation bolts must be tautly spun. And install it firmly. Mustn't
loosen and prohibit to mount it in the heart-emptied bricks or the brick crevices.
! The power source's socket must be adopted the super-quality mono-phase tri-pole one which
complies with the State's gauges. And it must be fitted the qualified ground wire, which must be
installed at the properly high positions and the uneasily water-showered damp places. This outlet
had better be typically used for the electric water heater(Diagram8).
! When it is in the initiative operation. you must make the tank fully fill the water, after that, you can
put through the power sources.
ASSEMBLING INSTRUCTIONS
PIPE CONNECTIONS
CAUTIONS ITEMS
P-5