h
oW to Install
CAUTION: If you use the system to watch a young child, do not place the
camera within the child's reach.
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the camera
to the power adapter.
Before starting permanent installation, verify its performance by observing
the image on the monitor when camera is positioned in the same location/
position where it will be permanently installed and the monitor is placed in
the location where it will be used most of the time.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for
the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source
or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions
between the camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER
place camera or cords within 3 feet of crib or playpen. Never use
extension cords with AC Adapters. Only use the AC Adapters provided.
Carefully unpack the camera.
1.
If you are installing cameras that did not come with the system, please
see the pairing camera section of this manual for
details on installation.
Mount the camera to the wall.
2.
Mark the position of the screw hole on the wall,
and drill a hole and insert a screw. Then firmly
attach the camera to the wall by placing the
stand over the installed screw and pushing the
base downwards.
SEP-5001RDP CU-170615.indd 9
n
To install on a concrete wall, drill a hole and use plastic anchor to fix.
`
The camera can also be placed on a flat surface, such as a table or
`
shelf, and no mounting hardware is required.
Adjust the viewing angle of the camera.
3.
Use the Pan, tilt control from the monitor to
adjust the viewing angle of the camera.
n
Adjusting the camera with excessive force
`
may damage the unit.
English · 9
2017/7/7 10:01:13