Panasonic WV-CW7S Manual Del Usuario página 2

ENGLISH VERSION
Features
The WV-CW7S is the smoked dome cover.
Precautions
Refer installation work to the dealer.
Installation work requires technique and experiences. Failure to observe this may cause fire, electric
shock, injury, or damage to the product.
Be sure to consult the dealer.
Installations
The following are installation instructions using WV-SFV631L as a representative example. Refer to
manuals of each model upon installation.
Note:
• When the smoke type dome cover is used, the reach distance of IR will become shorter and
the ambient illuminance for the day & night switchover will become lower compared to the
standard clear type dome cover. Please reconfirm the performance after reinstalling the enclo-
sure to the camera.
Step 1
Remove the enclosure from the camera
body
Loosen the 4 enclosure fixing screws using the
bit provided with the camera, and then remove
the enclosure from the camera body.
Enclosure
Camera body
2
Enclosure fixing
screws (4 pcs.)
Step 2
Remove the dome cover
Remove the 3 dome cover fixing screws (2
without washers, 1 with washer), and then
remove the dome cover holding plate, the light-
blocking sheet, the dome cover and the water-
proof rubber from the enclosure.
(The dome cover and the camera body are
connected with the installation auxiliary wire.
Please pay attention that the installation auxil-
iary wire will be removed at the moment when
the dome cover fixing screws are removed.)
Keep the removed dome cover holding plate,
the light-blocking sheet, 3 fixing screws until
using them in step 3.