Conformity Declaration - Metabo BS 14.4 LTX Impuls Manual Original

Original instructions

1. Conformity Declaration

We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 3.
2. Specified Use
The cordless drill/driver is suitable for drilling,
screwing and thread tapping as well as impact
drilling (depending on the model).
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Instructions
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Wear ear protectors with impact drills
(machines with the designation SB). Exposure
to noise can cause hearing loss.
Use auxiliary handles supplied with the tool
(depending on the model). Loss of control can
cause personal injury.
Hold power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Ensure that the spot where you wish to work is free
of power cables, gas lines or water pipes (e.g.
using a metal detector).
Protect battery packs from water and
moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from
defective Li-ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out
and comes into contact with your eyes, wash them
with clean water and seek medical treatment
immediately.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
LED (12): Do not view LEDs directly through optical
instruments, LED class 1M, classified as per DIN
EN 60825-1: 2003, wavelength: 400-700 nm; 300 µs.
5. Overview
See page 2.
1 Additional handle
2 Keyless chuck
3 Slide switch (drilling/impact drilling) *
4 Slide switch (torque control, drilling)
5 Switch (1st/2nd gear) - both sides of the
machine
6 Rotation selector switch (rotation setting,
transport lock) - both sides of the machine
7 Battery pack release button
8 Capacity indicator button
9 Capacity and signal indicator
10 Battery pack
11 Button for pulse function *
12 LED lights
13 Trigger
* depending on model
6. Commissioning
6.1 Assembly of additional handle (1)
(depending on the model)
For safety reasons, always use the additional
handle supplied.
ENGLISH en
9