Noise Emission; Transport; Setup Requirements - Maggi STEFF 2034 Manual De Instrucciones

Ocultar thumbs Ver también para STEFF 2034:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 109

1-7 NOISE EMISSION

EN
Below are listed, required by law, the
noise data:
Machine type
LEQ (dbA)
Maximum noise level at work
post
These values are the same for all the
feeder models covered in this manual.

1-8 TRANSPORT

The power feeder STEFF is packaged
in one single box that contains both
the feeder and the support.
It is advisable to keep the packing
material for subsequent transport
requirements.
38
Packaging
STEFF 2034
STEFF 2038
STEFF 2038CI
Value
STEFF 2044
66,7
STEFF 2048
69,8
STEFF 2068
STANDARD Support
1050 Support
PLUS Support
V Support

1-9 SETUP REQUIREMENTS

We can only guarantee the problem-
free, long-lasting functionality and
precision of your machine and safe
operation if the following requirements
on the setup area are fulfilled.
- The machine must stand in a dry,
enclosed room with temperatures
between +10°C and +40°C.\
- There must be sufficient room
Mass
around the machine so the operator
32 kg
cannot be squeezed between the
machine and a wall when any
33 kg
movable parts are estended.
33 kg
36 kg
- The power cable must be laid so the
operator cannot trip over it.
37 kg
47 kg
- The machine must be connected to a
stable current supply with max.
37 kg
deviations of +/-10% in the rated
41,5 kg
voltage.
43,5 kg
- The machine ground wire must be
44 kg
connected to the system ground
wire.
Tabla de contenido
loading

Este manual también es adecuado para:

Steff 2038Steff 2038 ciSteff 2044Steff 2048Steff 2068

Tabla de contenido