Master MT Tumbler 500 Manual De Uso Y Mantenimiento página 22

Assembling the machine
Tilt the blade back to its original position.
1
einsert the lower protector. Use the metal parts
3
indicated in the following image as a reference and
support the ends of the protector against them.
Insert the protector by following a rotating move-
ment on the lower part of the reel.
Fit the barrel, always holding it with both hands
5
and taking great care not to damage it.
Raise the side protector and secure it with the clip
7
Fix the blade by replacing the different elements in
2
this order: washer, spring, female (this must
preserve a space with respect to the spring).
Repeat the process on the other end.
Secure the lower protector, using the fasteners.
4
Reattach the drive belt. Insert it partially and rotate
6
the barrel to ease the strap fully back in place.
Place and secure the hopper with the two
8
fasteners, leaving a space between it and the
machine to avoid friction during operation.
22