Basic Safety Guidelines - Master MT Tumbler 500 Manual De Uso Y Mantenimiento

Basic safety guidelines

Security symbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life. Ignoring the
instructions can lead to serious harmful effects causing possible injury with danger of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life. Ignoring the
instructions can lead to damage to the product and to the user.
INFORMATION
This symbol indicates suggestions and especially practical information can be found below. This symbol
indicates suggestions and practical information for appropriate handling of Master Products equipment.
Ignoring this advice could result in misuse of the article.
User safety
The flowers to be processed by the machine must only be fresh, either herbaceous and/or semi-woody. Processing of any
+
flowers of a different nature can cause injury to the user and the machine. To process dry flowers, a specific barrel is
required. Ask the commercial department of Master Products if you want to trim dried raw material.
+
When using the machine, wear gloves and safety glasses. Never work with loose clothing, loose hair, bracelets, necklace, etc.
+
Never work under the influence of alcohol and/or drugs.
+ Wear safety glasses to minimize the risk of flying splinters.
Use the machine only if it is in perfect condition, otherwise users will be exposed to risks.
+
+ Safety devices such as switches, grids, guards, racks must not be dismantled under any circumstances.
Before carrying out any maintenance action on the machine, it must be switched off and disconnected from the electrical
+
supply.
Who can use the MT Tumbler 500 / 500 MED
The MT Tumbler 500/500 MED can only be used by people who have read and understood the use and maintenance manual.
If it is used by untrained staff, or it is not used correctly, users will be exposed to unnecessary risks.
Repairing the equipment
Only qualified staff can dismantle, repair and install new parts. If the product is within its warranty period, only a Master
Products engineer is allowed to make any changes without voiding the warranty.
How to switch off the equipment
The MT Tumbler 500/500 MED machine shuts down, under all circumstances, whenever the OFF switch is pressed. Before
carrying out any maintenance work on the machine, it must be switched off and disconnected from the electricity supply.
The grid detector, together with the emergency stop, is only a safety function and must NOT be used as a stop system for
the machine.
Disclaimers
Modifications on Master Products machines without the approval of the manufacturer are forbidden.
The manufacturer withdraws the warranty from any modified machine and does not accept liability for any failures and
accidents that may result.
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's engi-
neers or official representatives.
The operator using the machine must check that processed materials are regularly removed. Anything left behind could
become an obstruction and therefore cause the machine to malfunction.
17