Metabo RC 14.4-18 Manual Original página 24

ENGLISH
ENG
Continue pressing Step/Band button for approx. another 5 seconds until display FM and 50 kHz
(tuning step) fl ashing followed by a beep. By rotate Tuning Control knob, you may adjust to
100 kHz per tuning step.
After FM tuning step is reset, pressing Step/Band button again, display will show MW and fl ash
9 kHz. By rotate Tuning Control knob, you may adjust to 100 kHz per tuning step. Complete the
setting by pressing Step/Band button.
Aux and Headphones sockets
1. There are two Aux. One is Aux socket on the right side of your radio and another is Aux plug
in the battery compartment. Aux is for the use with a tape recorder/mini disc/mp3 player/CD
player or any other equipment that can provide a line level signal. Connecting external device
to Aux will automatically mute the internal signal. The Volume and Tone control can be used to
adjust sound level.
Note: Aux-1 LED will be on only when Aux socket on the right side of your radio is connected.
2. The Headphone socket (3.5 mm) located on the right side of your radio is for use with either
headphones or an earphone. Inserting the headphone plug automatically mutes the internal
loudspeaker. If the alarm radio or buzzer is expected for warning or wakening, the headphone
has to be unplugged.
DC out – charge your mobile phone
DC OUT functions only when the radio is switched off .
Suitable for phones with 3.6 – 4.8 Volt batteries. Please read instruction manual of your mobile
phone.
Connect the charging cable (not included) in delivery to the DC out. For Nokia phones you can
connect your phone directly to this cable. For Sony Ericsson mobile phones, connect the supplied
plug adaptor to go with the mobile phone connection. For other brand mobile phones, you can
source from mobile phone accessory stores to get the suitable plugs.
Light
Your radio is fi tted with a long life LED light located on the front of your radio. The light may be
switched on and off by gently pressing the Light button.
AC Out (equipment-dependent)
The AC OUT socket is active only when the radio is mains-operated and not when it is battery-
operated.
Open AC Out cover and insert the plug of external electronic device into socket. The maximum
permitted current consumption must not exceed 8A.FM built-in removable curved spring antenna.
24