Snooze Function; Sleep Function; Display Backlight - Metabo RC 14.4-18 Manual Original

Setting the HWS (Humane Wake System) buzzer alarm
A beep tone will activate when selecting the HWS alarm.
The alarm beep will increase in volume every 15 seconds for one minute followed by one minute
silence before repeating the cycle.
The HWS buzzer alarm will sound for one hour until turning off by pressing the Power button.
Press the Power button whilst the alarm is activated will cancel the alarm for 24 hours.
1. The HWS buzzer alarm can be set either radio is on or off .
2. Press and release the HWS buzzer alarm button , the symbol
3. During radio alarm fl ashing, press Tuning control/Scan/Time Set knob for more than 2 seconds
followed by a beep tone. Display Hour digit will fl ash.
4. Rotate Tuning Control knob to select required alarm hour, then press in Tuning Control knob
again. The minute digit will then fl ash.
5. Rotate Tuning Control knob to select required alarmed minute the press in Tuning Control knob
to complete alarm setting.
6. Press and hold down HWS buzzer alarm button
tone to switch on or off the alarm.
Display will appear

Snooze function

1. Whilst the alarm is activated, press any buttons, except the Power button, will activate the
snooze function. The radio or HWS buzzer alarm will be silenced with interval of 5 minutes.
2. The display will fl ash both the snooze symbol
can repeatedly during the 1 hour that the alarms are active.

Sleep function

The sleep timer will automatically switch off the radio after a preset time has elapsed.
1. Press and continue to hold down the Power button for more than 2 seconds, followed by a
beep tone, display will cycle through the available sleep times in the order 60-45-30-15-120-
90-60. Release the Power button when the required sleep time appears in the display.
The symbol
2. To cancel the sleep function, press the Power button, the symbol
radio is off .

Display backlight

Press any buttons will illuminate the LCD display for approx. 15 seconds. During scanning stations
and alarm activated, will also automatically illuminate the display. The Display will be permanently
illuminated during using AC power source.
Setting tuning step
Tuning steps on some countries are diff erent from where you purchase the radio. If you buy the
radio in Europe and intend to use in Northern America or some Southern American countries, you
may have to adjust tuning step so the radio may continue to serve you well. While radio is switched
off , long press Step/Band button for more than 2 seconds will fi rst show current FM tuning step.
when HWS buzzer alarm has been set.
will appear in the display and the radio will play the last station selected.
will fl ash.
for more than 2 seconds followed by a beep
and the alarm symbol. The snooze function
will disappear and
ENGLISH
ENG
23