LG 32LH570B Manual Del Usuario página 70

Depending upon the version of the software, icon position can be changed.
1 Press the (Home) button to access the
Smarthome menu. Select
OK.
2 Select the Network
NETWORK
Picture
Sound
TV Name
[LG] SMART TV LH57*
Channels
Network Connection
Network
Network Status
Wi-Fi Direct
General
Safety
Accessibility
Follow the instructions below that match to your
network status.Follow the instructions below that
match to your network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV,
AP (Router) and cable modem.
2 Power off and power on in the following order;
(1st) the cable modem, wait for the cable modem
to reset, (2nd) the AP (Router), wait for the AP
(Router) to reset and (3rd) the TV.
3 If you are using a static IP, enter the IP directly.
4 Contact Internet service provider or AP (Router)
manufacturer.
Troubleshooting Network Problems
(Settings) and press
Network Status menu.
Check the AP (Router) or
consult your Internet service provider.
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router) or
cable modem, wait 5 seconds. Reapply power.
2 Initialize (Reset) the AP (Router) or cable modem.
3 Contact Internet service provider or AP (Router)
manufacturer.
When X appears next to DNS:
1 Unplug the power cord of the AP (Router) or
cable modem, wait 5 seconds. Reapply power.
2 After the cable modem or AP (Router) has
initialized (Reset), try to reconnect.
3 Check that the MAC address of the TV/AP
(Router) is registered with your Internet service
provider. (The MAC address displayed on the
right pane of the network status window
should be registered with your Internet service
provider.)
4 Check the AP (Router) manufacturer's website
to make sure your router has the latest firmware
version installed.
SmartShare PC
SW Installation & Setting
Install the SmartShare PC SW program on your PC.
1 Go to www.lg.com. Then, select your region.
2 Select SUPPORT.
3 Select Software & Firmware. Then, search for your
model. Then, select SmartShare PC SW.
4 Download the SmartShare PC SW and install
it on your PC. You can run the program when
installation is complete.
NOTE
• SmartShare service is only available if TV and other
devices are connected to the same AP (Router).