Duraflame DFI-550-0 Manual Del Usuario página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

OPERATION INSTRUCTIONS
Function
POWER
FLAME
HEATER
TIMER
UP AND DOWN
A413
Icon
Description
Use the power button to turn on or off the stove from the
remote or control panel.
To adjust the flame brightness press the FLAME button.
The current flame brightness setting will be flashing on
the indicator, use the UP and DOWN arrow to adjust the
brightness.
There are 5 brightness settings, 5 is brightest and 1 is
dimmest.
To turn on the heater press the HEATER button. Once
pressed the heater will turn on and the indicator will be
flashing the current thermostat setting level. Use the UP and
DOWN arrows to set the desired thermostat level.
The thermostat setting range is 60°F - 82°F or 16°C - 28°C.
Setting "
thermostat will not turn off the heater.
NOTE: To change between °F and °C press and hold the
HEATER button on the control panel for 5 seconds.
To set the sleep timer press the TIMER button. Once pressed
the indicator will flash the current timer setting length, use
the UP and DOWN buttons to adjust the timer length.
Timer settings are 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H,
7H, 8H and 9H.
Press the corresponding button for the feature to be changed,
FLAME, HEATER, or TIMER then use UP and DOWN to
select the desired setting.
" turns the heater always on; in this setting the
7
www.tsicustomerservice.com
Tabla de contenido
loading

Tabla de contenido